The Ontario MG T Register
Classified Ads - Car Related

 

Please email your ad to to place an advertisment on this website.

OMGTR members may place ads in this section for vehicles, parts or accessories for sale or wanted. Non-members may submit ads but inclusion of the ad is at the discretion of the OMGTR executive. If the ad is no longer required please advise the webmaster. Ads will removed after 60 days unless the webmaster receives an email asking for their continuance.


Buyers and Sellers Beware!
Read this SCAM WARNING and be suitably cautious in any dealings with persons unknown.


Cars for Sale

1953 MGTD (27-Jan-2010)
Matching numbers, 7 hand-rubbed coats of MG red, solid frame, factory workshop manual.
NEW: Leather upholstery, top and side curtains, wiring, stainless exhaust and tires.
Same owner for 35 years. Pictures available. Car located in Hamilton ON
Appraised @ C$30,000. BEST OFFER BY MARCH 31, 2010
Dave Linfoot 905-385-9259 or

1955 MGTF 1250 (14-Jan-2010)
XPAG/TF/32854; body 13915
Colour biscuit (fenders) & cream (main body); beige canvas top, tonneau, boot; brown leather seats; wire wheels; excellent condition; 53,500 miles; manuals, maintenance records.
Car is in Windsor, Ontario. $23,500 – pictures available,
Contact Dave Ruch by

Top of Page        Home Page


Parts for Sale

MGTF Side Curtain Kit (9-Feb-2010)
New in a box, tan colour. This is a Moss kit priced at $514.95 US in Moss catalogue.
Priced at $300.00 Canadian plus shipping.
Len Bonnay 905-734-3475 or

MGTF Tonneau Cover (9-Feb-2010)
New black vinyl, full length. Never installed, no snaps installed therefore adaptable to any TF.
Priced at $200.00 plus shipping.
Len Bonnay 905-734-3475 or

MGTD Chrome Licence Plate Cover (11-Nov-2009)
No lens. Condition "Fair". $5.00Cdn
Wayne Baldwin, Brantford, ON. 519-753-4015 or

MGTC Parts (11-Nov-2009)
2 Chrome gas tank strips - VG - $50.00Cdn pair.
2 windshield wing nuts - F - $4.00Cdn pair.
1 seat wing nut - F - $2.00Cdn
2 side curtain holders - $8.00Cdn pair
1 muffler hanger bracket - like new - $10.00Cdn
2 door hinges - $50.00Cdn pair
1 rubber pedal cover #2252 - $10.00Cdn
2 rubber slotted grommets - G - $2.00Cdn pair
1 windshield connecting wiper rod - F - $20.00Cdn
1 carburetor flex line - F - $20.00Cdn
1 brake hose - F - $20.00Cdn
1 MG logo wooden shifter knob - E - $10.00Cdn
1 rear view mirror - $10.00Cdn
1 gas tank float sending unit - $10.00Cdn
Label indicators for dash - VG - $10.00Cdn
4 marker lamp sockets - F - $40.00Cdn set
2 speedo cables - $20.00Cdn pair
master cylinder heat shield - ask
Wayne Baldwin, Brantford, ON. 519-753-4015 or

Remaining MGA parts from rebuild. (1-Sep-2009)

1 Frame 1600 - Repaired and true - $500
1 Engine - 1600 block 1500 head, condition unknown - $150
1 Radiator - $100.00
1 Windscreen without glass - $50.00
Numerous - Wheel Rims - spoked and discs - rough - $10.00 ea
Numerous - Bonnets and Boot lids - $25.00 ea
Numerous - Fenders - rough to very rough - $10.00 ea

Richard Skidmore - Lindsay, ON - 705-328-2228

MG T parts for sale (14-Feb-2010)
I have quite a few parts for sale, left over from my father-in-Law, Joe Wilson (“Wilson Sports Cars”), have them on an Excel file so easy to send to interested parties.
Contact: Iwan Lewis 519-485-0374 Day/evening, or

MG T SERIES PARTS AND SERVICES: (11-Feb-2010)

-TA/TC front steering knuckle stub axle inserts with ¾”-16 tpi thread, $50.00 each side. Use MG TD/TF/MGA stub axle nuts.
-TA/TC Stub axles supplied and installed in your steering knuckles @$175.00 each side. Insert threads are ¾”-16 tpi, use nuts from MG TD/TF/MGA. Also for MMM cars, J2, PA, N etc.
-TA/TC Tompkins steering box cover adapter kit= $100.00
-TB/TC/early TD oil filter adapter for modern spin-on-$105.00
-TF/late TD oil filter adapter for modern spin-on-$70.00
-J2, F, M etc oil filter adapter for modern spin-on filter= $220.00 -
-TA/TC tapered rear axles with key and nut ( you taper bore your hubs ) $175.00 each (available TC 6 spline or Morris Minor 10 spline). Also for MMM cars.
-TA/TC new rear hubs taper bored for the above axles -$230.00 each. Also for MMM cars.
-TA/TC new front hubs -$220.00 each.
-TA/TC new rear wheel bearing securing 2" hex nuts with lip seals and keeper washers-$70.00 the set. Also for MMM cars, J2, PA, N etc. .
-TA/TC Alfin brake drums- $1,200.00 set of four.
-TD/TF Alfin brake drums- $1300.00 set of four.
-MGA 1500 Alfin brake drums=$1600.00 set of four
-TA/TC new high ration crown wheel and pinion gear set, 4.625 ratio-enquire.
-TB/TC rear gearbox steel reinforcing plates, pre-drilled ready for installation. Some studs and spacers required. Repairs a broken rear TC gearbox aluminum plate. $40.00
-TA/TC/MMM Dual Spare wheel adapter, ( uses original lock-nut )- $175.00
-TD/TF wire wheel front hubs- $185.00 each
-TD/TF wire wheel rear hubs-$230.00 each.
-TD/TF new brake master cylinder - $200.00 .
-XPAG/XPEG Light steel racing flywheel-$575.00 Suitable for TC or TD with 7 1/2” heavy duty diaphram clutch cover. Use original starter and applicable 7 ¼” ring gear.
-MG T Series Art Prints, Set 4 prints, TA Tickford, TC, TD, TF, size 14” x 18” mat, $25.00

All prices are in US$ with shipping extra.

Bob Grunau
150 Pinewood Trail,
Mississauga, Ontario, Canada, L5G 2L1,
905-274-4136 or email

Top of Page        Home Page


Cars Wanted

Top of Page        Home Page


Parts Wanted

Top of Page        Home Page


Miscellaneous

Precision Hobby Lathe (4-Mar-2010)
Made in Japan Toyo Record ML210 Precision metal turning lathe and drill head attachment. This is the ideal hobby lathe for making all your hobby needs and small british car parts and spacers that cost a fortune to buy through Moss and associates. The lathe has a 52mm (2in) centre height, and a 210mm (8in) bed length. The swing over carriage is 58mm(2 1/4in), and the swing over bed is 104mm (4in). Both main and tail spindles are Morse Taper #1. The lathe is 120volts and has a variety of spindle speeds having the ability to also screw cut. The lathe comes with spare drive belts, a 3 jaw chuck, face plate, live tailstock centre, tailstock drill chuck, additional tool post, steady, and a lathe mounted mini drill head attachment that can be used with mill cutters to mimic a mill head attachment. Why buy a cheaply made Chinese unit from Princess auto when you can have this Japanese manufactured high quality jewel of a lathe for less than half the price c/w spares and attachments! Offered at $425 obo for quick sale. Located in Innerkip, ON
Contact Ken Bannister at 519-469-9173 or email me at

Click to Enlarge

Road and Track Magazine (1-Sep-2009)
Complete run from first issue on.
Some are hard bound and some are in Road and Track binders.
Most are stored loose in file cases. Some early copies are reprints.
This is a rare collection and a fine reference for any automobilist.
Best offer.
Gord Whatley, Acton ON, 416-727-0441 or

Classic and Sports Car Magazine. (1-Sep-2009)
Complete run of Classic and Sports Car magazine. All like new in file cases.
Probably the best international magazine on classic cars in print.
Best Offer.
Gord Whatley, Acton ON, 416-727-0441 or

Top of Page        Home Page


Return to OMGTR Home Page

Last revision: 04-Mar-2010