 |
The Ontario MG T Register
Member Recommended Resources
|
|
This page lists member recommended products or suppliers of
parts and services. It is hoped that we will develop a list of trusted suppliers
anywhere, but primarily in Ontario or Canada. The list is intended as a starting
point for a reader seeking a source for some product or service.
To add a recommendation to the list, or to comment (pro or con), send an email
to .
- MG T Series Oil Filter Adapters
supplies an adapter for T series cars permitting the use of modern spin-on
oil filters. I have one on my 1951 TD and I consider it to be a very solid
piece of workmanship.
24-Apr-2001
- Wheel Balancing - On the Car
RNJ Tire Sales, 1600 Alliance Road, Unit 14, Pickering Ontario L1W 3V2.
Tel: 905-420-3686 Fax: 905-420-9534 1-800-963-3686 email:
Web site: www.rnjtires.com
Paul Ross (owner) just did my TD and it is now a pleasure to drive at any
legal speed - and maybe a bit more.
Not only that, it's fun to watch him work!
3-Jun-2001
Just had Paul Ross of RNJ Tires re-balance my tires to eliminate a steering
wheel shudder at 50mph. Car now runs much smoother and straighter. Quite a
knowledgable guy when it comes to tires. (Now I know the car will do at least
60 mph).
30-Jun-2004
- Shock Absorber Rebuilding
Russ Bamsey of Paris, Ontario. 519-442-3673.
I have just had my MGA shock absorbers rebuilt by Russ Bamsey of Paris, Ontario.
He did a very good job at competitive prices, $120.00 per shock for rears
and $140.00 for fronts.
22-Aug-2001
- Body Work and Repainting
Bruce Heath Collision Service, 62 Peel St. E. Alma, 519-846-8330.
Did the body work and painting of our 1950 TD and will do my 56 MGA. He enjoys
working on older vehicles.
22-Aug-2001
- Keys for Little British Cars
Acme Lock and Key, 2085 Lawrence Ave E. Scarborough, ON 416-699-9999
> Can provide blanks and cut keys based on the lock code or a key to duplicate.
They have done good ones for my 1951 MGTD, but you should call with your specifics
before you go. There's probably a limit to their resources!
22-Jan-2002
> Just had them make a key for my '53 MGTD... called with the ignition
number and the key was sent in 2nd day mail. Total cost: $20.00. Very pleased
...and it worked.
- Niagara On The Lake. 5-June-2004
- General Repairs and Maintenance of British Cars
Cheshire Motors
NEW ADDRESS - EFFECTIVE Feb. 1, 2007
886 Winston Churchill Blvd. Unit #3, Oakville, ON L6J 7X5. 416-504-4955
or 905-901-2029
John Keen - Owner
John specializes in Rolls Royce and high end cars but will take on anything
- even American iron.
John has completely re-built his own MGTD and has done extensive work on my
TD, and an MGA I owned briefly.
He does excellent work, at a fair price, and I recommend him without reservation.
31-Dec-2002
- Fasteners, Hardware Components and Specialized Tools
Spaenaur Inc., 815 Victoria Street North,
Kitchener, ON N2B 3C3. (519)744-3521 (800)265-8772
A good source for small bits. They do retail and are very helpful. You can
browse their 1,784 page catalogue on their website.
18-Jan-2003
- Chrome Plating
I just had some chrome parts on my TC replated at 'Jim's Polishing & Buffing
Ltd.' , I was very pleased with the quality of the work and the reasonable
price. They are located at 53 Moira Ave., Scarborough - Ph. 416-264-2577.
(10-Mar-2003) (N.B. Jim Routh is not the "Jim" in
the firm's name! Ed.)
- Complete engine machining, balancing and rebuilding.
Lambke Machine & Rebuild, 1241 Regional Rd. 19, RR 1, Wilsonville, Ontario
N0E 1Z0
Call 519-443-6330 for information and directions.
25-Mar-2003
- Preston Radiator, 21 Secord Dr. St.Catharines. 905-935-1293
Had a fuel tank chemically cleaned and sealed... great, quick job (well, took
a week to get the sludge out of it...) Also had a rad flushed and cleaned
for $30.00
31-Jan-2005
- British Vehicle Electric, 24 Ernest Kettle Cres., Beeton, ON L0G
1A0
905-729-1035 Cell:705-790-7386
Michael Hildrey - Owner
Had a starter rebuilt by BVE.. The price was reasonable $80.00. Our local
guy could not get parts from any of his suppliers.
12-June-2005
- Sand and Soda Blasting - Robinson's Marine, 5197 Michener Rd.RR 1,
Sherkston, ON L0S 1R0. 905-894-1102
A friend of mine had his TR6 "soda blasted" a few weeks ago... They use baking
soda and there is no heat produced so no warping. It is also environmentally
friendly, and doesn't harm rubber. (that means you can do rims with the tyres
on if you want). Anyway...the whole car (TR6 sized) was done for $300.00.
14-Jul-2005
- Moss Dealer - TOM HAINES British Cars Vintage British Car Repairs.
Factory Trained Licensed Technician.
Specializing in Austin Healey, Triumph and M.G
Niagara on The Lake. Email:
905-262-1416 Cell 905-650-6300
10-Dec-2005
- Moss Dealer - Little British Car Company
Ltd.
29311 Aranel, Farmington Hills, MI 48334-2815 USA
Jeff Zorn Tel: 248-489-0022 or 800-637-9640 Fax: 248-489-9665
Although based in Detroit MI, Jeff is a member of several Canadian British
Car clubs and is a frequent visitor North of the border.
He offers all the Moss product line and more. things that he imports directly.
His prices are always better than Moss.
I've purchased a number of items from Jeff, and always been satisfied with
price and delivery.
8-February-2006
- Plastic Repair - The
Plastic Surgeon

Plastic Welding provides repair and fabrication services in Durham Region
and surrounding areas. We specialize in plastic repair, also providing quality
body repair as well refinishing. This service covers everything from automobiles,
motorcycles and snowmobiles to industrial machinery, tanks, and related equipment.
29-March 2007
- Carbureter and Fuel Pump Rebuilding

David Jackson - Highway 2, Newcastle Ontario
905-987-8652
David was a BMC mechanic for years. Rebuilds SU and Weber carbureters, and
SU Fuel pumps.
He replaced the Stromberg carb on my MGB with a single SU, making a world
of difference. He rebuilt the SU carbureters on June's TC to our complete
satisfaction.
25-June-2008
Return to OMGTR Home Page
Last modified 25-Jun-2008